• Purpose

• Specification

• Logic

• Global and configurable parameters

• Dictionaries

• Request structure

• Authorize

• Headers

• Request data validation

  • Validate Legal Entity Type

  • Validate Encounter

    • Global validations

    • Important

    • Validate Conditions

  • Validate Observations

    • Validate observations for encounter.type == "patient_identity" 

  • Validate Immunizations

  • Validate Allergy Intolerances

  • Validate Risk Assessments

  • Validate Devices

  • Validate Medication Statement

  • Validate Medication Administration

  • Validate Diagnostic Report

  • Validate Procedures

  • Validate Clinical impression

• Primary key validation

• Reference validation

• Performer(asserter) validation

• Period Validation

• Employee validation

• Related care plan validation

• Processing

• Response structure

• Post-processing processes

• HTTP status codes

Purpose

Web service "Submit Encounter Package" allows to transmit all the data collected during the encounter into eHealth DB using one single endpoint. I.e. all the data such as conditions, observations, allergy intolerances should be aggregated in one single data package in order to be registered in eHealth.

Specification

Logic

Using this web service you can submit:

You can send the same request (with the same body) multiple times, but a new job will not be created before previous is not performed.

Global and configurable parameters

Variables

Medical Events Dictionaries and configurations | employee_encounter_classes

Medical Events Dictionaries and configurations | employee_encounter_types

Medical Events Dictionaries and configurations | legal_entity_episode_types

Medical Events Dictionaries and configurations | episode_type_encounter_classes

Medical Events Dictionaries and configurations | eHealth/encounter_classes

Medical Events Dictionaries and configurations | encounter_class_encounter_types

Medical Events Dictionaries and configurations | PSYCHIATRY_ICPC2_DIAGNOSES_EVIDENCE_CHECK

Medical Events Dictionaries and configurations | PSYCHIATRY_ICD10_AM_CONDITION_EVIDENCE_ALLOWED

Medical Events Dictionaries and configurations | <system>_ASSISTANT_EMPLOYEE_CONDITIONS_ALLOWED

Medical Events Dictionaries and configurations | <system>_ICD10_AM_MED_COORDINATOR_EMPLOYEE_CONDITIONS_ALLOWED

Medical Events Dictionaries and configurations | ICD10_AM_<SPECIALITY_TYPE>_SPECIALITY_CONDITIONS_ALLOWED

Dictionaries

Dictionaries_general

Request structure

See on Apiary

Example:

Authorize

• Verify the validity of access token

  • Return (401, 'Invalid access token') in case of validation fails

• Verify that token is not expired

  • in case of error - return (401, 'Invalid access token')

• Check user scope encounter:write in order to perform this action

  • in case of error generate 403 response ('Invalid scopes')

Headers

• Content-Type:application/json

• Authorization:Bearer {{access_token}}

• API-key:{{secret}}

Request data validation

Note: No update operations are allowed. All IDs, submitted as PK, should be unique for eHealth. 

1. Validate patient status

   1. db.patients.status for this patient must "active"

      1. in case of error return 409 - "Patient is not active"

2. Validate request according to JSON Schema

   1. Return 422 with list of validation errors in case validation fails 

3. Validate Visit

   1. $.visit.id is unique

      1. in case of error return 422 - "Visit with such id already exists"

   2. $.visit.end is filled

      1. in case of error return - "End date of visit must be filled"

   3. Period Validation

4. Validate DS

   1. Validate that  DS belongs to the performer of encounter

      1. validate that drfo from DS and party.drfo of performer matches

   2. Validate that performer of encounter is a current user 

      1. validate that one of users employee is a performer of encouner

      2. validate that client_id from token == PRM.performer.legal_entity

5. Validate encoded signed content according to JSON Schema

   1. Return 422 with list of validation errors in case validation fails

Validate Legal Entity Type

Validate legal entity from token: legal_entities.type should be in me_allowed_transactions_le_types and legal_entities.status =='active' 

Validate Encounter

Global validations

1. Validate encounter id as a primary key

2. Validate that the date is within acceptable limits

   1. $.encounter.date<= current_date

   2. $.encounter.date>=current_date-encounter_max_days_passed

   3. $.encounter.date>=episode.period.start where episode.id=$encounter.episode.identifier.value

      1. in case of error return 422 "Encounter’s date must be equal to or greater than start date of episode"

3. Validate "episode" is an active episode that belongs to the current patient

   1. $.encounter.episode.identifier.value is one of  ME.patinet{patient_id}.episodes{*}.id

      1. in case of error return 422 "Episode with such ID is not found"

   2. $.encounter.episode.identifier.value is an ID of an Episode that meets the requirements:

      1. ME.patient{patinet_id}.episodes{episode_id}.status = 'active'

         1. in case of error return 422 "Episode is not active"

      2. ME.patient{patinet_id}.episodes{episode_id}.managing_organization==token.client_id

         1. in case of error return 422 "Managing_organization in the episode does not correspond to user`s legal_entity"

4. Validate "visit" is a visit that belongs to the current patient

   1. $.encounter.visit.identifier.value=$.visit.id  OR  ID of already existing Visit in ME.patient{patient_id}.visit.id

      1. in case of error return 422 "Visit with such ID is not found"

5. Validate referrals

   1. As a referral it can be referenced electronic (registered in the system) OR paper service request

   2. Validate ($.encounter.incoming_referrals OR $.encounter.paper_referral) or none in request

   3. Validate incoming referrals as  References

   4. Validate paper referral as Object (paper_referral)

   5. Validate incoming referrals that corresponds to $.encounter.incoming_referrals[*].identifier.value have:

      1. ..used_by_legal_entity.identifier.value==token.client_id OR null

         1. in case of error return 409 "Service request is used by another legal_entity"

      2. ..status==active or program_processing_status=in_progress (any status is valid in case program_processing_status= in_progress)

         1. in case of error return 409 "Invalid service request status"

      3. ..if program is defined program_processing_status=new, in_queue or in_progress

      4. check that service_request contains based_on parameter

         1. in case based_on present in service_request

            1. verify care_plan:

               1. It should be in active status

               2. Care plan's period end (if exist) should be greater than current date or equal.

            2. verify activity:

               1. It has activity.detail.kind=service_request; activity.detail.product_reference=service_id. 

               2. It has scheduled, in_progress status

         2. in case based_on not present in request skip previous validations.

6. Validate performer

   1. $.encounter.performer.identifier.value is an ID of existing employee in PRM.Employees

      1. in case of error return "There is no Employee with such id"

   2. $.encounter.performer.identifier.value  == PRM.Employees.id where (PRM.Employees.status==`active`)

      1. in case of error return "Employee is not active"

   3. $.encounter.performer.identifier.value  == PRM.Employees.id where (PRM.Employees.legal_entity== client_id)

      1. "User can not create encounter for this legal_entity"

   4. validate employee type according to encounter.class - use config file (employee_encounter_classes)

      1. in case error return 422, "Employee.type $type is forbidden for your encounter class"

   5. according to employee.type as stated in employee_encounter_types

      1. in case error return 422, msg "Employee.type $type is forbidden for your encounter type"

7. division

   1. $.encounter.division.identifier.value must meet the following requirements

      1. PRM.division.status = "ACTIVE"

         1. in case of error return 409 "Division is not active " 

      2. PRM.division.legal_entity= token.client_id

         1. in case of error return 409 "User is not allowed to create encouners for this division"

8. Validate supporting_info as References

9. Validate encounter.class  

   1. according to legal_entity.type - use config file (legal_entity_episode_types)

      1. in case error return 409, msg "Encounter.class $class is forbidden for your legal entity type"

   2. according to episode.type - use config file (episode_type_encounter_classes)

      1. in case error return 409, msg "Encounter.class $class is forbidden for your episode type"

   3. according to employee.type as stated in encounter class validations

      1. in case error return 409, msg "Encounter.class $class is forbidden for your employee type"

10. Validate encounter.type according to encounter.class - use config file encounter_class_encounter_types

    1. in case error return 409, msg "Encounter.type $type is forbidden for your encounter class"

11. Validate actions 

    1. Validate actions presence according to  encounter class validations

       1. in case error return '422', msg 'TBC'

    2. Defined in the system that corresponds to  encounter class validations

       1. in case error return '422', msg 'TBC'

12. Validate action_references 
    Note. For encounter.action_references pass only "service", and the "service_group" does not pass

    1. Validate action_references presence according to  encounter class validations

       1. in case error return '422', msg 'At least one of action references, diagnostic reports or procedures should exist in encounter package'

    2. Validate code as a Reference

    3. Validate action_references is in prm.services, has status ACTIVE and is_active = true

       1. in case error return '422', msg 'Service with such ID is not found'

       2. in case error return '422', msg 'Service should be active'

13.  Validate diagnoses 

    1. Validate conditions as  References

    2. Validate that encounter type= 'intervention'. If not, than:

       1. Validate encounter has exactly one diagnosis where $.encounter.diagnoses[?(@.role.coding[0].code=="primary")]

       2. in case of error return 422 "Encounter must have exactly one primary diagnosis"

    3. Validate http://condition.id is in DB or in current Encounter package 

    4. Validate that each condition is active (verification_status != entered_in_error)

       1. in case of error return 409 "Conditions in diagnoses must be active"

    5. Validate that primary diagnosis defined in the system that corresponds to  encounter class validations

       1. in case of error "Primary diagnosis should be defined in {$.encounter.diagnoses[*].role.coding[*].system } system"

    6. Validate that rank

       1. Rank value should be integer and >= 1

          1. in case of error return 422 "expected the value to be >= 1"

       2. Rank value should be integer and <= 10

          1. in case of error return 422 "expected the value to be <= 10"

14. Validate reasons

    1. Validate reasons presence according to  encounter class validations

       1. in case error return 422, msg 'Validation failed. You can find validators description at our API Manifest: Nebo #15 API Manifest · Apiary .', description 'can't be blank.

15. Validate hospitalization 

    1. Validate hospitalization presence according to  encounter class validations

       1. in case error return 422, msg "Hospitalization block is forbidden for encounter.class = $encounter.class" 

    2. Validate all fields according to schemata

       1. destination

       2. discharge_disposition

       3. pre_admission_identifier

       4. admit_source

       5. re_admission

       6. discharge_department

    3. If encounter.type.code = "discharge" than encounter.hospitalization.admit_source is required, encounter.hospitalization.discharge_disposition is required, encounter.hospitalization.discharge_department is required

       1. in case error return 422, msg "<parameter> is required for encounter.type.code = "discharge"

    4. Validate destination is a valid legal_entity in prm with status is ACTIVE and is_active = true

       1. in case error return 422, "Legal entity is not active"

16.  Validate patient_id for encounter.type == "patient_identity"

    1. $patient_id should exist in mpi.prepersons.id, have status =='ACTIVE' and is_active = true

       1. in case error return 'TBC', msg 'TBC'

17. If incoming referrals exists and incoming_referral (service request) category not in ('transfer_of_care', 'hospitalization') and encounter.class in ("AMB", "INPATIENT") and encounter.type <>  "patient_identity" validate service for encounter.actions OR diagnostic_report.code OR procedure.code

    1. If service_requests.code.identifier.value is service, validate $resourse.code.identifier.value = service_requests.code.identifier.value

       1. in case error return 409, "Service in $resourse differ from service in service request"

    2. if service_requests.code.identifier.value is service_group, validate $resourse.code.identifier.value in (SELECT service_id from service_inclusions where service_group_id='service_requests.code.identifier.value')

       1. in case error return 409, "Service in $resourse differ from services in service request's service_group"

    3. Validate $resourse.service.is_active = true

       1. in case error return 409, "Service should be active"

18. Validate patient verification status:

    1. If encounter has incoming referral with valid and active service request, then skip this validation.

    2. Else check patient's verification_status is not equal to NOT_VERIFIED.

       1. in case of error return 409, "Patient is not verified"

19. Validate priority

    1. Validate priority presence according to eHealth/encounter_priority

       1. in case error return 409, ""

    2. If encounter.class.code = "INPATIENT", priority is required

       1. in case error return 422, "Priority for encounter is required"

Validations for encounter classes

Validate Conditions

1. Validate conditions ids as  primary keys

2. Validate that context of conditions is a current encounter

   1. $.conditions[*].context.identifier.value == $.encounter.id

      1. in case of error return "Submitted context is not allowed for the condition"

3. Validate code depending on encounter class

   1. if $.encounter.class = PHC - allowed both eHealth/ICPC2/condition_codes and eHealth/ICD10_AM/condition_codes

   2. if $.encounter.class in (AMB, INPATIENT) - allowed only eHealth/ICD10_AM/condition_codes

4. Validate code.coding depending on the qty of codes

   1. Maximum one code from one dictionary (eHealth/ICPC2/condition_codes and eHealth/ICD10_AM/condition_codes) is allowed

      1. in case of error return 422 with msg "Only one code from one dictionary is allowed"

5. Validate that the date is within acceptable limits

   1. $.conditions[*].onset_date <= current_date

      1. in case of error "Onset date must be in past"

   2. $.condition[*].onset_date>=current_date-condition_max_days_passed

      1. in case of error "Onset date must be greater than  {{current_date-condition_max_days_passed}}"

6. $.conditions[*].onset_date <= current_date

   1. in case of error "Onset date must be in past"

7. $.conditions[*].asserted_date <= current_date

   1. in case of error "Asserted date must be in past"

8. $.conditions[*].evidences[*].detail[*].identifier.value is an ID of existing observation in MedicalEvents.Observations or one of $.observations[*]
   OR $.conditions[*].evidences[*].detail[*].identifier.value is an ID of existing condition in MedicalEvents.Conditions

   1. in case of error 422 "<medical_event> with such id is not found"$.conditions[*].evidences[*].detail[*].identifier.value is an ID of existing observation in MedicalEvents.Observations or one of $.observations[*]

   2. in case of error 409 "Observation with such id is not found"

9. $.conditions[*].evidences[*].detail[*].identifier.value meet follownig conditions

   1. MedicalEvents.Observation.Patient == patient_id (from url)

      1. Error 409 "Evidence can not reference another patient"

   2. MedicalEvents.Observation.Status != "entered_in_error"

      1. Error 409 "Observation in "entered_in_error" status can not be used as an evidence"

10. Validate $.conditions[*].evidences[*].detail[*].identifier.value
    for each $.conditions[*].evidences
    check:

    1. MedicalEvents.<MedicalEvent>.Patient == patient_id (from url)

       • Error 422 "<medical_event> with such id is not found"

    2. MedicalEvents.<MedicalEvent>.Status != "entered_in_error"

       • Error 422 "<medical_event> in "entered_in_error" status can not be used as an evidence"

    3. in case if PSYCHIATRY_ICPC2_DIAGNOSES_EVIDENCE_CHECK chart parameter contains $.conditions[*].code.coding.code
       check if at least one item from $.conditions[*].evidences meets requirements: 

       1. check if $.conditions[*].evidences[*].detail[*].identifier.type.coding.code == "condition" 

          • Error 422 "Condition must be entered as an evidence to set condition code <$.conditions[*].code.coding.code>"

       2. MedicalEvents.Condition.Code.Coding array contains at least one of codes from PSYCHIATRY_ICD10_AM_CONDITION_EVIDENCE_ALLOWED chart parameter.

          • Error 422 "Condition can not be used as an evidence to set condition code <$.conditions[*].code.coding.code>"

       3. get Encounter by MedicalEvents.Condition.Context
          get Encounter.Diagnoses[*] with http://Condition.id  
          check if Encounter.Diagnoses[*].Role is equal to $.encounter.diagnoses[*].role for $.conditions[*].id.

          • Error 422 "Condition can not be set as an evidence with wrong diagnosis role ("<role>")"

11. Validate asserter.

    1. $.conditions.asserter.identifier.value is an ID of one of users employee 

       1. in case of error return "Employee is not performer of encounter"

    2. according to logic Submit Encounter Data Package#Performer(asserter)validation

       1. check if asserter's employee_type == "ASSISTANT" then define allowed conditions from ASSISTANT_EMPLOYEE_CONDITIONS_ALLOWED

          in case condition code is not allowed for the employee_type - return 409 error ('Asserter has no required employee type to set condition code <code>')

       2. check if asserter's employee_type == "MED_COORDINATOR" then define allowed conditions from ICD10_AM_MED_COORDINATOR_EMPLOYEE_CONDITIONS_ALLOWED

          1. in case condition code is not allowed for the employee_type - return 409 error ('Asserter has no required employee type to set condition code <code>')

       3. if primary_source = true and code has eHealth/ICD10_AM/condition_codes dictionary value:

          1. define allowed specialities for ICD10_AM condition code using a set of chart variables ICD10_AM_<SPECIALITY_TYPE>_SPECIALITY_CONDITIONS_ALLOWED

          2. check if asserter's speciality in allowed specialities defined on previous step

             1. in case speciality not allowed for the condition code - return 409 error ('Asserter has no required speciality to set condition code <code>')

12. Validate primary_source:

    • if primary_source = true and code has eHealth/ICD10_AM/condition_codes dictionary value:

      • define allowed specialities for ICD10_AM condition code using a set of chart variables ICD10_AM_<SPECIALITY_TYPE>_SPECIALITY_CONDITIONS_ALLOWED

      • check if asserter's speciality in allowed specialities defined on previous step

        • in case speciality not allowed for the condition code - return 409 error ('Asserter has no required speciality to set condition code <code>')

    • if primary_source = false - skip this check

Validate Observations

1. Validate observations ids as  primary keys

2. Validate that context of observation is a current encounter

   1. $.observations[*].context.identifier.value==$.encounter.id

      1. in case of error return "Submitted context is not allowed for the observation"

3. Validate that the date is within acceptable limits

   1. $.observations[*].issued <= current_time

      1. in case of error return "Issued date must be in past"

   2. $.observations[*].issued>=current_date-observation_max_days_passed

      1. in case of error "Issued must be greater than  {{current_date-observation_max_days_passed}}"

4. Validate performer(asserter)

5. Validate$.observations[*].components[*].value_period as a Period

6. Validate $.observations[*].value_quantity

   1. $.observations[*].value must be with number type

      1. in case of error return "type mismatch. Expected number but got {entered type}"

   2. $.observations[*].comparator can take the following values : [">", ">=", "=", "<=", "<"]

      1. in case of error return "value is not allowed in enum"

   3. $.observations[*].unit can take values from dictionary eHealth/ucum/units 

      1. in case of error return "value is not allowed in enum"

7. Validate $.observations[*].value_codeable_concept

   1. $.observations[*].code validate that the code belongs to the dictionary system

      1. in case of error return "Value is not allowed in enum"

8. Validate $.observations[*].value_boolean

   1. $.observations[*].value_boolean must be boolean type

      1. in case of error return "type mismatch. Expected boolean but got {entered type}"

9. Validate $.observations[*].value_string

   1. $.observations[*].value_string must be string type

      1. in case of error return "type mismatch. Expected string but got {entered type}"

10. Validate $.observations[*].value_sampled_data

    1. $.observations[*].data must be string type

       1. in case of error return "type mismatch. Expected string but got {entered type}"

    2. $.observations[*].origin must be with number type

       1. in case of error return "type mismatch. Expected number but got {entered type}"

    3. $.observations[*].period must be with number type

       1. in case of error return "type mismatch. Expected number but got {entered type}"

    4. $.observations[*].factor must be with number type

       1. in case of error return "type mismatch. Expected number but got {entered type}"

    5. $.observations[*].lower_limit must be with number type

       1. in case of error return "type mismatch. Expected number but got {entered type}"

    6. $.observations[*].upper_limit must be with number type

       1. in case of error return "type mismatch. Expected number but got {entered type}"

    7. $.observations[*].dimensions must be with number type

       1. in case of error return "type mismatch. Expected number but got {entered type}"

11. Validate $.observations[*].value_range

    1. $.observations[*].low must be with object type

       1. in case of error return "type mismatch. Expected object but got {entered type}"

    2. $.observations[*].high must be with object type

       1. in case of error return "type mismatch. Expected object but got {entered type}"

12. Validate $.observations[*].value_ratio

    1. $.observations[*].numerator must be with object type

       1. in case of error return "type mismatch. Expected object but got {entered type}"

    2. $.observations[*].denominator must be with object type

       1. in case of error return "type mismatch. Expected object but got {entered type}"

13. Validate $.observations[*].value_time

    1. $.observations[*].value_time must be with string type

       1. in case of error return "type mismatch. Expected string but got {entered type}"

14. Validate $.observations[*].value_date_time

    1. $.observations[*].value_date_time must be with string type

       1. in case of error return "type mismatch. Expected string but got {entered type}"

15. Validate diagnostic report is one of reports in the current package

    1. $.observations[*].diagnostic_report.identifier.value == one of $.diagnostic_report[*].identifier.value

       1. in case of error "Invalid reference"

16. Validate $.observations[*].reaction_on

    1. check that the appropriate immunizations.status != "entered_in_error"

       1. in case of error return 409 "Immunization with status ‘entered_in_error’ can not be use"

17. Validate $.observations.code

    1. if observations.code.coding[*].code value is included in chart variables 'OBSERVATION_CODES_WITH_<VALUE_TYPE>_REQUIRED', <value_type> field is mandatory

       1.  in case of error return 422 “This field is required for code = <code>“

Validate observations for encounter.type == "patient_identity" 

1. EDP with type == "patient_identity" should have list of special observations. 

2. Such list can contain limited set of codes, some of them are mandatory

Validate Immunizations

1. Validate immunizations ids as  primary keys

2. Validate primary_source

   1. in case primary_source == true

      1. $..performer must be filled

         1. in case of error return 422 with msg "performer must be present if primary_source is true"

      2. $..report_origin must be absent

         1. in case of error return 422 with msg "Only one of the parameters must be present"

      3. check not_given parameter

         1. in case not_given == false

            1. $..explanation.reasons, $..manufacturer, $..lot_number, $..expiration_date, $..dose_quantity.value, $..dose_quantity.unit, $..dose_quantity.code, $..site, $..route, $..vaccination_protocols.dose_sequence, $..vaccination_protocols.authority, $..vaccination_protocols.series, $..vaccination_protocols.series_doses, $..vaccination_protocols.target_diseases must be filled (inclusive with those that are mandatory according to the apiary)

               1. in case of error return 422 with msg "<reasons|manufacturer|lot_number|expiration_date|value|unit|code|site|route|dose_sequence|authority|series|series_doses|target_diseases> must be present if primary_source is true and not_given is false"

            2. $..explanation.reasons_not_given must be absent

               1. in case of error return 422 with msg "Only one of the parameters must be present"

         2. in case not_given == true

            1. $..explanation.reasons_not_given, $..vaccination_protocols.dose_sequence, $..vaccination_protocols.authority, $..vaccination_protocols.series, $..vaccination_protocols.series_doses, $..vaccination_protocols.target_diseases must be filled (inclusive with those that are mandatory according to the apiary)

               1. in case of error return 422 with msg "<reasons_not_given|dose_sequence|authority|series|series_doses|target_diseases> must be present if primary_source and not_given is true"

            2. $..explanation.reasons must be absent

               1. in case of error return 422 with msg "Only one of the parameters must be present"

   2. in case primary_source == false

      1. $..report_origin must be filled

         1. in case of error return 422 with msg "report_origin must be present if primary_source is false"

      2. $..performer must be absent

         1. in case of error return 422 with msg "Only one of the parameters must be present"

      3. check not_given parameter

         1. in case not_given == true return error 422 with msg "Only completed immunizations can be filled if primary_source is false and not_given is true"

         2. in case not_given == false

            1. $..explanation.reasons, $..dose_quantity.value, $..dose_quantity.unit, $..vaccination_protocols.authority, $..vaccination_protocols.target_diseases must be filled (inclusive with those that are mandatory according to the apiary)

               1. in case of error return 422 with msg "<reasons|value|unit|authority|target_diseases> must be present if primary_source and not_given is false"

            2. if vaccination_protocols.authority == MoH $..vaccination_protocols.dose_sequence, vaccination_protocols.series, vaccination_protocols.series_doses must be filled

               1. in case of error return 422 with msg "<dose_sequence|series|series_doses> must be present if primary_source and not_given is false"

            3. $..explanation.reasons_not_given must be absent

               1. in case of error return 422 with msg "Only one of the parameters must be present"

            4. $..manufacturer must be optional

3. Validate that context of immunizations is a current encounter

   1. $.immunizations[*].context.identifier.value == $.encounter.id

      1. in case of error "Submitted context is not allowed for the immunization"

4. Validate that the date is within acceptable limits

   1. $.immunizations[*].date <= current_time

      1. in case of error "Date must be in past"

   2. $.immunizations[*].date>=current_date-immunization_max_days_passed

      1. in case of error "Date must be greater than  {{current_date-immunization_max_days_passed}}"

5. Validate performer according to the Rule 

6. Validate that observation submitted as a detail of reaction is an existing observation that belongs to the current patient

   1. $.immunizations[*].reactions[*].detail.identifier.value is an ID of existing observation in ME.observations where (ME.observations.patient_id==patient_id from url) OR one of $.observations[*].id

      1. in case of error return 422 "There is no observation with such id"

Validate Allergy Intolerances

1. Validate allergy intolerances ids as  primary keys

2. Validate that context of allergy_intolerances is a current encounter

   1. $.allergy_intolerances[*].context.identifier.value == $.encounter.id

      1. in case of error "Submitted context is not allowed for the allergy_intolerances"

3. Validate asserter according to the Rule

4. Validate that the date is within acceptable limits

   1. $.allergy_intolerances[*].onset_date_time<= current date_time

      1. in case of error "Onset date time must be in past"

   2. $.allergy_intolerances[*].onset_date_time>=current_date-allergy_intolerance_max_days_passed

      1. in case of error "Onset date time must be greater than  {{current_date-allergy_intolerance_max_days_passed}}"

5. Validate that asserted_date is in past

   1. $.allergy_intolerances[*].asserted_date<= current date_time

      1. in case of error "Asserted date must be in past"

6. Validate that last_occurrence is in past

   1. $.allergy_intolerances[*].last_occurrence<= current date_time

      1. in case of error "Last occurrence must be in past"

Validate Risk Assessments

1. Validate risk assessment id as a primary key

2. Validate that context of risk_assessments is a current encounter

   1. $.risk_assessments[*].context.identifier.value == $.encounter.id

      1. in case of error "Submitted context is not allowed for the risk_assessments"

3. Validate that asserted_date  is within acceptable limits

   1. $.risk_assessments [*].asserted_date<= current date_time

      1. in case of error "Asserted date  must be in past"

   2. $.risk_assessments [*].asserted_date>=current_date-risk_assessment_max_days_passed

      1. in case of error "Asserted date must be greater than  {{current_date-risk_assessment_max_days_passed}}"

4. Validate performer according to the Rule

   1. validate performer is an active doctor from current legal_entity

      1. $..performer.identifier.value is an ID of existing employee in PRM.employee

         1. in case of error "Employee with such id is not found"

      2. $..performer.identifier.value == PRM.employees.id where (PRM.employees.status == "APPROVED" and PRM.employees.employee_type in ("DOCTOR", "SPECIALIST")

         1. in case of error return 422 "Invalid employee type"

5. Validate only one of these fields are filled: reason_reference , reason_codeable_concept

6. Validate reason_reference as a Reference

7. Validate basis as a Reference

8. Validate when_period as a Period

9. Validate only one of the fields is filled: prediction.when_period or prediction.when_range

10. Validate only one of the fields is filled: prediction.probability_decimal or prediction.probability_range

Validate Devices

1. Validate device id as a primary key

2. Validate that context of devices is a current encounter

   1. $.devices[*].context.identifier.value == $.encounter.id

      1. in case of error "Submitted context is not allowed for the device"

3. Validate that asserted_date  is within acceptable limits

   1. $.devices[*].asserted_date<= current date_time

      1. in case of error "Asserted date  must be in past"

   2. $.devices[*].asserted_date>=current_date-device_max_days_passed

      1. in case of error "Asserted date must be greater than  {{current_date-device_max_days_passed}}"

4. Validate asserter according to the Rule

5. Validate usage_period as a period

Validate Medication Statement

1. Validate medication statement id as primary key

2. Validate that context of medication statement is a current encounter

   1. $.medication_statements[*].context.identifier.value == $.encounter.id

      1. in case of error "Submitted context is not allowed for the medication statement"

3. Validate that asserted_date  is within acceptable limits

   1. $.medication statements[*].asserted_date<= current date_time

      1. in case of error "Asserted date  must be in past"

   2. $.medication statements[*].asserted_date>=current_date-medication statement_max_days_passed

      1. in case of error "Asserted date must be greater than  {{current_date-medication statement_max_days_passed}}"

4. Validate asserter according to the Rule

5. Validate based_on as a Reference to OPS.medication_request

Validate Medication Administration

1. Validate medication statement id as primary key

2. Validate part_of 

   1. validate procedure or medication_administration is made for the same patient

      1. procedure.patient_id=@person_id

      2. medication_administration.patient_id=@person_id

         1. in case error return 409 "Procedure/Medication administration was made for another person"

   2. validate procedure or medication_administration is not in status `entered_in_error`

      1. in case error return 409, "Procedure/Medication administration is not active"

   3. if part_of.identifier.value is a procedure validate it is a procedure in DB or in payload

      • in case error return 422, "Procedure with such id is not found"

3. Validate medication

   1. validate that medication is of type 'BRAND'

      1. in case error return 422, "Medication should be of type brand"

   2. medication corresponds to the INNM_DOSAGE medication from request.medication 

      1. "select count(*) from ingredients where parent_id=‘medication_administration.medication.id’ and medication_child_id = ‘medication_request.medication_id’ " >=1

         in case error return 422,  "Medication should correspond to the one in request"

4. Validate that context of medication administration is a current encounter

   1. $.medication_administration[*].context.identifier.value == $.encounter.id

      1. in case of error "Submitted context is not allowed for the medication administration"

5. validate performed_date_time <= now()

   1. in case error return 422, "performed_date_time should be in the past"

6. Validate performer according to the Rule

   1. validate performer is an active doctor from current legal_entity

      1. $..performer.identifier.value is an ID of existing employee in PRM.employee

         1. in case of error "Employee with such id is not found"

      2. $..performer.identifier.value == PRM.employees.id where (PRM.employees.status == "APPROVED" and PRM.employees.employee_type in ("DOCTOR","SPECIALIST"))

         1. "Employee is not an active doctor"

7. validate reason_references

   1. validate  Condition|Observation|DiagnosticReport as Reference

   2. validate Condition|Observation|DiagnosticReport is not in status "entered_in_error"

      1. in case error return 409, "Reason reference should be active"

   3. validate Condition|Observation|DiagnosticReport is made for the same person

      1. in case error return 409, "Reason reference was made for another person"

   4. validate Condition|Observation|DiagnosticReport exist in DB or in payload

      1. in case error return 422, "Condition|Observation|DiagnosticReport with such id is not found"

8. Validate request

   1.  validate medication_request as a reference

   2. validate medication_request is in active status. medication_request.status='ACTIVE' and is_active=true

      1. in case error return 409, "medication request is not active"

   3. validate medication request is made for the same person

      1. in case error return 409, "medication request was made for another person"

   4. Validate medication_request.started_at < now()

      1. in case error return 409, "Medication request started at should be in the past"

9. Validate dosage

Validate Diagnostic Report

1. Validate diagnostic reports ids as primary keys

2. Validate based_on as Reference

3. Validate that service_request, referenced as based_on, is

   1. in status is active or program_processing_status=in_progress (any status is valid in case program_processing_status= in_progress)

      1. in case of error return 409 "Invalid service request status"

   2. if program is defined than used_by_legal_entity==token.client_id OR null

      1. in case of error return 409 "Service request is used by another legal_entity"

   3. if program is defined than program_processing_status == new, in_queue or in_progress

   4. check that service_request contains based_on parameter

      1. in case based_on present in service_request

         1. verify care_plan:

            1. It should be in active status

            2. Care plan's period end (if exist) should be greater than current date or equal.

         2. verify activity:

            1. It has activity.detail.kind=service_request; activity.detail.product_reference=service_id. 

            2. It has scheduled, in_progress status

      2. in case based_on not present in request skip previous validations.

4. category

   1. Validate that one of diagnostic reports categories corresponds to service category, that is references as code in DR

      1. $.diagnostic_report.category[?]=PRM.services.category where PRM.services.id=$.diagnostic_report.code.identifier.value

         1. in case of error return 422 "None of the diagnostic report categories matches with the service category"

5. Validate code

   1. Validate code as Reference

   2. If service_requests.code.identifier.value is service, validate $diagnostic_report.code.identifier.value = service_requests.code.identifier.value

      1. in case error return 409, "Service in diagnostic_report differ from service in service request"

   3. if service_requests.code.identifier.value is service_group, validate $diagnostic_report.code.identifier.value in (SELECT service_id from service_inclusions where service_group_id='service_requests.code.identifier.value')

      1. in case error return 409, "Service in diagnostic_report differ from services in service request's service_group"

   4. Validate diagnostic_report.service.is_active = true

      1. in case error return 409, "Service should be active"

6. Validate effective_period as a period

7. Validate that issued is within acceptable limits

   1. $.diagnostic_reports[*].issued<= current date_time

      1. in case of error 422 "Asserted date  must be in past"

   2. $.diagnostic_reports[*].issued>=current_date-diagnostic_report_max_days_passed

      1. in case of error 422 "Issued must be greater than  {{current_date-diagnostic_report_max_days_passed}}" 

8. Validate conclusion_code:

   1. $.diagnostic_reports[*].conclusion_code.coding[*].code validate that the code belongs to the dictionary system 'eHealth/ICD10_AM/condition_codes'

      1. in case of error return "Value is not allowed in enum"

   2. Check that there is only one code in conclusion_code.coding array

      1. if more - return error "Only one code from one dictionary is allowed"

9. Validate recorded_by as Employee

10. Validate encounter

    1. $.diagnostic_reports[*].encounter.identifier.value == $.encounter.id

       1. in case of error 409 "Invalid reference"

11. Validate performer:

    1. as Employee

    2. according to logic Performer(asserter) validation

12. Validate managing_organization is a current legal_entity

    1. $.managing_organization.identifier.value==token.client_id

       1. in case of error 409 "Managing organization does not correspond to user's legal entity."

13. Validate result_interpreter.identifier as Employee

14. Validate result_interpreter.identifier is an employee with employee_type = DOCTOR or SPECIALIST

15. Validate only One of the fields is filled:

    1. $.diagnostic_report[*].results_interpreter.reference OR $.diagnostic_report[*].results_interpreter.text

    2. $.diagnostic_report[*].performer.reference OR $.diagnostic_report[*].performer.text

16. Validate primary_source

    1. If primary_source==true, then

       1. Managing organization MUST be filled

       2. performer.reference MUST be filled

    2. If primary_source==false, then

       1. report_origin must be filled

       2. performer.reference must NOT be filled

       3. results_enterpreter.reference must NOT be filled

17. Validate patient verification status:

    1. If diagnostic report has based_on with valid and active service request, then skip this validation.

    2. Else check patient's verification_status is not equal to NOT_VERIFIED.

       1. in case of error return 409, "Patient is not verified"

Validate Procedures

1. Validate by json schema

2. Validate procedure id as primary key

3. Validate that service_request, referenced as based_on, is

   1. check that service_request contains based_on parameter

      1. in case based_on present in service_request

         1. verify care_plan:

            1. It should be in active status

            2. Care plan's period end (if exist) should be greater than current date or equal.

         2. verify activity:

            1. It has activity.detail.kind=service_request; activity.detail.product_reference=service_id. 

            2. It has scheduled, in_progress status

      2. in case based_on not present in request skip previous validations.

4. Validate code

   1. Validate code as Reference

   2. Validate procedure.service.is_active = true

      1. in case error return 409, "Service is not active"

5. Validate encounter

   1. $.procedure[*].encounter.identifier.value == $.encounter.id

      1. in case error return 409, "Submitted encounter is not allowed for procedure"

6. Validate performed_date_time

   1.  performed_date_time is real

      1. in case error return 422, "Performed_date_time in invalid"

   2. performed_date_time <= now

      1. in case error return 422 "Procedure cannot be registered in future"

7. Validate recorded_by

   1. Validate recorded_by as Reference

   2. $..recorded_by.identifier.value is an ID of existing employee in PRM.employee

      1. in case of error  return 422, "Employee with such id is not found"

   3. Validate recorded_by is employee with status='APPROVED' and is_active= true and end_date is null or more than today

      1. in case error return 409, "This action is prohibited for current employee" 

   4. Validate employees.legal_entity_id=$managing_organization.identifier.value

      1. in case error return 409, "Employee should be from current legal entity"

8. Validate asserter

9. Validate division

   1. Validate division as Reference

   2. $division is an ID in PRM.divisions

      1. in case return 422, "Division with such id is not found"

   3. division.status=ACTIVE and is_active=true

      1. in case error return 409, "Division is not active"

   4. division.legal_entity_id = $client_id or division.legal_entity_id=$managing_organization.identifier.value

      1. in case error return 409, "Division is not in current legal_entity"

10. Validate managing_organization is a current active legal_entity with proper type

    1.  as Reference

    2. $managing_organization is an ID in PRM.legal_entities

       1. in case return 422, "Legal entity with such id is not found"

    3. validate managing_organization status is 'ACTIVE' and is_active=true

       1. in case error return 422 ('Legal entity is not active')

    4. validate legal_entity type is in ('PRIMARY_CARE','MSP','MSP_PHARMACY','MSP_PHARMACY') (use `ME_ALLOWED_TRANSACTIONS_LE_TYPES` from charts)

       1. in case error return 422, "Legal entity with type $legal_entity.type cannot perform procedures"

    5. validate $managing_organization.identifier.value = $client_id

       1. in case of error 409 "Managing organization does not correspond to user's legal entity."

11. Validate reason_references

    1. Validate reason_reference as a Reference

    2. Validate reason_refernce.identifier.value is condition not in status `entered_in_error`

       1. in case error return 422, "Condition is canceled"

12. Validate outcome

    1. validate outcome as a Reference 

    2. validate outcome.coding.object.system is in dictionary eHealth/procedure_outcomes

       1. in case error return 422, "outcome not in dictionary eHealth/procedure_outcomes"

13. Validate complication_details

    1. validate complication_details as a Reference 

    2. validate complication_details.identifier.value refer to condition in the same encounter package

       1. in case error return 422, "complication_details does not correspond to condition in this encounter package"

14. Validate category

    1. according to the dictionary 'eHealth/procedure_categories' - by schemata

    2. Validate that procedure category corresponds to service category, that is references as code in procedure

       1. $.procedure.category=PRM.services.category where PRM.services.id=$.procedure.code.identifier.value

          1. in case of error return 422 "Procedure category does not match with the service category"

15. Validate patient verification status:

    1. If procedure has based_on with valid and active service request, then skip this validation.

    2. Else check patient verification_status is not equal to NOT_VERIFIED.

       1. in case of error return 409, "Patient is not verified"

Validate Clinical impression

1. Validate by json schema

2. Validate clinical impression id as primary key (Primarykeyvalidation)

3. Validate status

   1. Check that the code belongs to the dictionary system (eHealth/clinical_impression_statuses)

      • in case of error - return 422 ('value is not allowed in enum')

   2. Check it has value = completed

      • in case of error - return 422 ('value is not allowed in enum')

4. Validate code

   1. Check that the code belongs to the dictionary system (eHealth/clinical_impression_patient_categories)

      1. in case of error - return 422 ('value is not allowed in enum')

   2. Validate code.coding depending on the qty of codes. Maximum one code is allowed

      1. in case of error - return 422 ('Only one code is allowed')

   3. Check by code.coding[0].code and code.coding[0].system active rules in rule_engine_rules collection

      1. in case any active rules present - check request only with following validations

      2. in case rule present in collection - check request with following validations and with additional from rule engine rule

5. Validate description

   1. Check that value with string type

      1. in case of error - return 422 ('type mismatch. Expected string but got {entered type}')

6. Validate encounter

   1. Check the value is valid reference on encounter resource

      • Check that value is an object with references of type encounter

        • in case of error - return 422 ('value is not allowed in enum')

   2. Check the value is valid reference on encounter resource

      • Check that $.clinical_impressions[*].encounter.identifier.value == $.encounter.id

        1. in case error - return 422 ('Invalid reference')

7. Validate effective_period and effective_date_time:

   1. Validate that at least one of the parameters are present

      • in case of error - return 422 ('At least one of the parameters must be present')

8. Validate effective_period as a period (PeriodValidation)

   1. Validate value in the field $.effective_period

      • Check that $.effective_period.start <= encounter.date

        • in case of error - return 422 ('Start date must be in the past')

      • Check that $.effective_period.end >= $.effective_period.start

        • in case of error - return 422 ('End date must be greater than or equal the start date')

   2. Validate that $.effective_period.end is within acceptible limits

      • Check that $.effective_period.end <= current_time

        • in case of error - return 422 ('Date must be in past')

      • Check that $.effective_period.end >= current_date-clinical_impression_max_days_passed

        • in case of error - return 422 ('Date must be greater than {{current_date-clinical_impression_max_days_passed}}')

9. Validate effective_date_time

   1. Check that field $.effective_date_time with string type

      1. in case of error - return 422 ('type mismatch. Expected string but got {entered type}')

   2. Check that field $.effective_date_time <= current_time

      1. in case of error - return 422 ('Date must be in past')

   3. Check that field $.effective_date_time >= current_date-clinical_impression_max_days_passed

      1. in case of error - return 422 ('Date must be greater than {{current_date-clinical_impression_max_days_passed}}')

10. Validate assessor

    1. Validate assessor as Reference (Referencevalidation)

       1. $.assessor.identifier.value is an ID of existing employee in PRM.employee

          1. in case of error - return 422 ('Employee with such id is not found')

    2. Validate assessor is employee with status='APPROVED' and is_active= true and end_date is null or more than today

       1. in case of error - return 422 ('Invalid employee status')

11. Validate previous

    1. Check the value is valid reference on clinical impression resource

       • Check that value is an object with references of type clinical_impression

         • in case of error - return 422 ('value is not allowed in enum')

       • Check that clinical impression is active (status is not entered_in_error)

         • in case of error - return 422 ('Clinical impression in "entered_in_error" status can not be referenced')

       • Check that clinical impression belongs to patient ($.subject)

         • in case of error - return 422 ('Clinical impression with such id is not found')

12. Validate problems

    1. Check that value is an array with references of type condition

       • in case of error - return 422 ('value is not allowed in enum')

    2. Check that each condition is active (verification_status is not entered_in_error)

       1. in case of error - return 422 ('Condition in "entered_in_error" status can not be referenced')

    3. Check that condition belongs to the patient ($.subject)

       • in case of error - return 422 ('Condition with such id is not found')

13. Validate finding

    1. Check that value is an array with objects

       1. Validate item_reference

          1. Check that value is an object with reference of resource condition, observation (further <Medical event resource>)

             1. in case of error - return 422 ('value is not allowed in enum')

          2. Check that <Medical event resource> is active (status is not entered_in_error)

             1. in case of error - return 422 ('<Medical event resource> in "entered_in_error" status can not be referenced')

          3. Check that each reference:

             1. is valid ME of defined type above

             2. belongs to the patient ($.subject)

                1. in case of error - return 422 (<Medical event resource> with such ID is not found')

          4. In case some resources present in active rule, check that they correspond to configured rule

             1. in case of error - return 409 ('Submitted patient category does not correspond to rule engine rule')

       2. Validate basis

          1. Check that value with string type

             1. in case of error - return 422 ('type mismatch. Expected string but got {entered type}')

14. Validate supporting_info

    1. Check that value is an array with references of type episode_of_care, procedure, diagnostic report, encounter (further <Medical event resource>)

       1. in case of error - return 422 ('value is not allowed in enum')

    2. Check that <Medical event resource> is active (status is not entered_in_error)

       1. in case of error - return 422 ('<Medical event resource> in "entered_in_error" status can not be referenced')

    3. Check that each reference:

       1. is valid ME of defined type above

       2. belongs to the patient ($.subject)

          1. in case of error - return 422 (<Medical event resource> with such ID is not found')

    4. In case some resources present in active rule, check that they correspond to configured rule

       1. in case of error - return 409 ('Submitted patient category does not correspond to rule engine rule')

15. Validate note

    1. Check that value with string type

       1. in case of error - return 422 ('type mismatch. Expected string but got {entered type}')

16. Validate patient

    1. In case patient params present in active rule, get them through subject and check that they correspond to configured rule

       1. in case of error - return 409 ('Submitted patient category does not correspond to rule engine rule')

    2. In case medication dispense data presents in active rule, get medication dispense data in patient context (through subject) and check that it correspond to configured rule

       1. in case of error - return 409 ('Submitted patient category does not correspond to rule engine rule')

Primary key validation

1. Validate that IDs of all submitted entities in the array are unique

   1. validate that $.{collection}[*].id from the payload are all unique among themselves

      1. in case of error return 409 "All primary keys must be unique"  

   2. validate there is no entity with such id in the corresponding Medical events collection

      1. in case of error return 422 "{Entity} with such id already exists"

Reference validation

This validation is used to validate references to medical events data from patient's collection. 

1. Validate that $..identifier.value is an existing value from $..identifier.type.coding[0].code collection in DB and it belongs to the patient OR it is a value from corresponding collection in the current request 

   1. in case of errror return 422 "There is no {$..identifier.type.coding[0].code} with such id"

2. Validate that this entity is not in status entered_in error

   1. in case of errror return 422 "Could not reference entity in status entered_in_error"

Example:

In this case validate that "9183a36b-4d45-4244-9339-63d81cd08d9c" is an existing observation from patients collection and it is not entered_in_error.

Performer(asserter) validation

1. case $..primary_source==true

   1. $..performer(or $..asserter) must be filled

      1. in case of error "Performer (asserter) must be filled"

   2. $..report_origin must be absent

      1. in case of error "Report_origin can not be submitted in case primary_source is true" 

   3. validate performer(asserter) is a valid value from corresponding dictionary

      1. $..performer.identifier.type.coding[*].system == "eHealth/resources"

         1. in case of error "Submitted system is not allowed for this field"

      2. $..performer.identifier.type.coding[*].code=="employee"

         1. in case of error "Submitted code is not allowed for this field"

   4. validate performer(asserter) is a active doctor from current legal_entity

      1. $..performer.identifier.value is an ID of existing employee in PRM.employee

         1. in case of error "Employee with such id is not found"

      2. $..performer.identifier.value == PRM.employees.id where (PRM.employees.status == "APPROVED" and PRM.employees.employee_type=="DOCTOR" or "SPECIALIST") (in case of observation also ASSISTANT)

2. case primary_source==false

   1. $..report_origin must be filled 

      1. in case of error "Report_origin must be filled"

   2. if $..primary_source==false then $..performer(asserter) must be absent

      1. in case of error "Performer(asserter) can not be submitted in case primary_source is false" 

   3. validate report_origin

      1. $..report_origin.coding[*].system == "eHealth/report_origins"

         1. in case of error "Submitted system is not allowed for this field"

Period Validation

1. $..period.start <= current_dateTime

   1. in case of error return 422- "Start date must be in past"

2. if $..period.end is filled:

   1. $..period.end > visit.period.start

      1. in case of error return 422 - "End date must be greater than the start date"

Employee validation

Users can not reference employees between different legal entities. Employee that is not in status `approved` can not be referenced as well.

1.  $...identifier.value exists in PRM.employees

   1. in case of error 409 "Employee not found"

2. $...identifier.value == PRM.employees.id where (PRM.employees.status == "APPROVED" and PRM.employees.legal_entity==token.client_id)

   1. in case of error 409 "Submitted employee is not an active employee from current legal entity"

Related care plan validation

1. If entities (encounter.incoming_referral, procedure.based_on, diagnostic_report.based_on) has reference on service request and service_request[].activity.detail.quantity was set - check possibility to create EDP depending on service_request[].activity remaining quantity

   1. calculate the quantity of artifacts that are contained in the $.activity.outcome_reference by service_request.based_on[].activity[].id

   2. calculate the quantity of artifacts that are contained in the request and have a link to the service request

   3. compare quantity from outcome_reference with the artifact quantity

   4. check that difference is greater then or equal to zero

      1. in case of error return 409 "The total amount of the prescribed service quantity exceeds quantity in care plan activity"

Processing

API paragraph not found

Response structure

See on Apiary

Example:

Post-processing processes

1. Save signed_content to Media Storage

2. Save data to corresponding collections in DBs

3. Save link to the signed content to the encounter

4. Enrich encounter.diagnoses:

   1. select condition.code from Medical Events DB(or from request body)  where condition.id==diagnoses[@].condition.identifier.value 

   2. set diagnoses[@].code = select 1

5. Save diagnoses from encounter to episodes.current_diagnoses

   1. ME.patients.episodes.diagnoses = $.encounter.diagnoses 

6. Add a record to the ME.patient.episodes{episode_id}.diagnoses_hstr

   1. date = current_date

   2. evidence = reference to encounter  ($.encounter.id)

   3. diagnoses = $.encounter.diagnoses 

7. Set display_value to employees for all submitted objects

   1. Select PRM.parties.first_name, PRM.parties.second_name, PRM.parties.last_name from PRM.parties where (PRM.parties.id == (Select PRM.employees.party_id from  PRM.employees where PRM.employees.id== $.care_manager.identifier.value))

   2. ME.patients.encounters{encounter_id}.performer.display== Select 1

   3. ME.conditions{condition_id}.asserter.display == Select 1

   4. ME.observations{observation_id}.performer.display == Select 1

   5. ME.patients.immunizations{immunization_id}.performer.display == Select 1

   6. ME.patients.allergy_intolerance{ai_id}.asserter.display == Select 1

   7. ME.patients.devices{device_id}.asserter.display == Select 1

   8. ME.patients.medication_statements{ms_id}.asserter.display == Select 1

   9. ME.patients.risk_assessment{rs_id}.asserter.display == Select 1

   10. ME.patients.diagnostic_reports{dr_id}.performer.reference.display == Select 1

   11. ME.patients.diagnostic_reports{dr_id}.recorded_by.reference.display == Select 1

   12. ME.patients.diagnostic_reports{dr_id}.results_interpreter.reference.display == Select 1

8. In case there are reactions ($.observations[?].reaction_on) in the request, update corresponding immunizations with the reactions:

   1. Set in ME.patient.immunization.reaction.detail $.observation.id as a reference
      note: $.observations[?].reaction_on should not be saved in observation, only in corresponding immunization

9. Set display_value for legal_entities

   1. ME.patients.diagnostic_reports{dr_id}.managing_organization.display

10. Set managing_organization for submitted observations, conditions, encounter

    1. ME.conditions{cond_id}.managing_organization=token.client_id

    2. ME.observations{observ_id}.managing_organization=token.client_id

    3. ME.encounters{encounter_id}.managing_organization=token.client_id

11. In case encounter.incoming_referral was filled, set episode_origin to encounter

    1. Select episode where id== (select ME.encounter.episode.identifier.value where encounter.id==(select ME.service_requests.context.identifier.value where id==$.encounter.incoming_referral.identifier.value))

12. In case diagnostic_reports.based_on was filled, set episode_origin to diagnostic report

    1. Select episode where id== (select ME.encounter.episode.identifier.value where encounter.id==(select ME.service_requests.context.identifier.value where id==$.diagnostic_reports.based_on.identifier.value))

13. in case service request has reference on care plan and encounter.incoming_referral was filled set $.encounter.id to related to $.service_request activity[].outcome_reference

14. in case service request has reference on care plan and procedures.based_on was filled set $.procedures.id to related to $.service_request $.activity[].outcome_reference

15. in case service request has reference on care plan and diagnostic_reports.based_on was filled set $.diagnostic_reports.id to related to $.service_request activity[].outcome_reference

16. in case reference on service request has reference on care plan update $ .activity.status to in_progress if previous activity status was scheduled

17. in case reference on service request has reference on care plan update $ .activity.remaining_quantity parameter by subtracting the quantity of artifacts that have a reference on service request that contains an $.based_on.[]activity

18. If there are at least one record for speciality where speciality_officio = true:

1. Enrich encounter data with performer speciality:

   1. SELECT speciality -> 'speciality' FROM employees WHERE speciality ->> 'speciality_officio' = 'true' AND id = $.encounter.performer.identifier.value

   2.  Set encounter.performer_speciality as CodeableConcept type with system = SPECIALITY_TYPE

HTTP status codes

episode-of-care_api

encounter-data-package_api

api_spec